Top Tec 4200 5W-30 Engine Oil by LIQUI MOLY – LM Performance

Von einem Mystery-Man-Autor

Last updated 15 mai 2024

Top Tec 4200 5W-30 Engine Oil by LIQUI MOLY – LM Performance

PRODUCT DESCRIPTION High-tech low-friction motor oil based on synthetic technology. Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine. Depending on the manufacturer's specifications, oil change intervals of up to 30,000 or 50,000 km or every 2 years for
PRODUCT DESCRIPTION High-tech low-friction motor oil based on synthetic technology. Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine. Depending on the manufacturer's specifications, oil change intervals of up to 30,000 or 50,000 km or every 2 years for low mileage drivers are thus possible. For gasoline and diesel engines that meet the Euro 4, Euro 5 and Euro 6 emission standards (including FSI, common rail and pumped jet injection). Also suitable for gas-driven vehicles (CNG/LPG) and vehicles with a diesel particulate filter (DPF), even if retrofitted. Exception: R5 and V10 TDI engines before manufacture year 06/2006. Tested for use with turbochargers and catalytic converters. PRODUCT DETAIL Ensures excellent engine cleanliness and exceeds even the strictest test requirements of wellknown vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.). PROPERTIES - Tested for turbochargers and catalytic converters- Reduces pollutant emissions- Smooth engine running- Reduces fuel consumption- Instant lubrication after cold start- Long engine service life- Excellent wear resistance- Optimum oil pressure under all operating conditions- Outstanding engine cleanliness- High lubrication reliability- Optimum stability to aging- High shear stabilitySPECIFICATIONS AND APPROVALS- ACEA C3- API SP- BMW Longlife-04- MB-Approval 229.31- MB-Approval 229.51- Porsche C30- VW 504 00- VW 507 00LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: - ACEA C2- BMW Longlife-01 (up to 2018)*- BMW Longlife-01 FE (up to 2018)*- Fiat 9.55535-S1- Fiat 9.55535-S3- VW 500 00- VW 501 01- VW 502 00- VW 503 00- VW 503 01- VW 505 00- VW 505 01- VW 506 00 - VW 506 01 (With the exception of R5 and V10 TDI engines before 6/2006)- *limited to BMW gasoline engines without particle filters in the EU including Norway, Switzerland and LiechtensteinTECHNICAL DATA SAE class (engine oils): 5W-30 SAE J300Density at 15 °C: 0,855 g/cm³ DIN 51757Viscosity at 40 °C: 70,0 mm²/s ASTM D 7042-04Viscosity at 100 °C: 12,2 mm²/s ASTM D 7042-04Viscosity at -35 °C (MRV): < 60000 mPas ASTM D4684Viscosity at -30°C (CCS): ≤ 6600 mPas ASTM D5293Viscosity index: 173 DIN ISO 2909HTHS at 150°C: ≥ 3,5 mPas ASTM D5481Pour point: -42 °C DIN ISO 3016Evaporation loss (Noack): 9,5 % CEC-L-40-A-93Flash point: 230 °C DIN ISO 2592Total base number: 8,5 mg KOH/g DIN ISO 3771Sulfate ash: ≤ 0,8 g/100g DIN 51575Color number (ASTM): L 3,0 DIN ISO 2049AREAS OF APPLICATION For gasoline and diesel engines that meet the Euro 4, Euro 5 and Euro 6 emission standards (including FSI, common rail and pumped jet injection). Also suitable for gas-driven vehicles (CNG/LPG) and vehicles with a diesel particulate filter (DPF), even if retrofitted. Exception: R5 and V10 TDI engines before manufacture year 06/2006. Tested for use with turbochargers and catalytic converters. For universal application for the latest engine technologies from Audi, BMW, Mercedes-Benz and the VW Group. APPLICATION The specifications and instructions from the assembly or vehicle manufacturer must be followed! Optimum effectiveness is only possible when the product is used unmixed. Note for workshops: The residual amount of a commercially available oil must not exceed 5 percent for tank systems.