PoE to USB-C 5V 4A Gigabit PoE Adapter for Raspberry Pi 4 – ADSBexchange.com

Von einem Mystery-Man-Autor

Last updated 15 mai 2024

PoE to USB-C 5V 4A Gigabit PoE Adapter for Raspberry Pi 4 – ADSBexchange.com

Want to power your Pi 4 based feeder with PoE? This external unit accomplishes that with the full 4A needed by the Pi 4, along with Gigabit networking capability! Fully complies with IEEE 802.3af/at POE Switch or Injector. Output 20W max (5V/4A) at 802.3at PoE+ and 12.5W max (5V/2.5A) at 802.3af (standard PoE). Plug an

Want to power your Pi 4 based feeder with PoE? This external unit accomplishes that with the full 4A needed by the Pi 4, along with Gigabit networking capability!

Fully complies with IEEE 802.3af/at POE Switch or Injector.
Output 20W max (5V/4A) at 802.3at PoE+ and 12.5W max (5V/2.5A) at 802.3af (standard PoE).
Plug and play - Simply connect the ethernet and power cables, then you are ready to go. Set it up in seconds without any extra effort or configuration.
Suitable for any USB-C Device (Raspberry Pi 4, Camera, Phone, Tablet and more).

Output 20W max (5V/4A) with 802.3at PoE switch or Injector.

Output 12.5W max (5V/2.5A) with 802.3af PoE switch or Injector.

802.3at compliant POE+ switch or injector highly recommended for Raspberry Pi 4.

Highlights:

Supports 10/100/1000Mbps wired Ethernet connection.
Eliminate the need for a nearby AC outlet.
Lightning-fast Ethernet and Stable DC 5V/4A max power.
IEEE 802.3af/at compliant PoE switch or injector is required (Not included).
Optimized chip solution with Isolation transformer and Standard PD chip.
Increased mobility for end devices, added safety (no AC power involved) and reliability.
Easy install, set it up in seconds, just plug and play